B-SERIES FUELTECH FT450 PATCH HARNESS. This harness is made to work with a fueltech ft450 ecu on Acura and Honda OBD1 chassis. This is a plug and play harness with the only wiring needed will be for the vtec that will require a relay.
This harness is built with tefzel milspec wire and wrapped in mil grade sleeving. With the limited inputs and outputs of the ft450 the most necisary sensodr are wired the following sensor are. 6 pin dtm with 2 input options with 12v power 5v power signal ground and power ground. 2 pin dtm with 2 output options.